Tag: tooth filling process

Tooth Filling Process

First, the dentist numbs the area around the tooth with a local anesthetic. Then he uses a drill, an air abrasion device (a scraper with air pressure) or a laser to remove the decayed part of the tooth. The choice of tools depends on the dentist’s experience and level of comfort with a particular tool, investment in specific equipment, and the location and extent of tooth decay. Then, while removing the decay, the dentist examines that area to ensure that he has removed all the tooth decay.

When the decay is completely removed, the dentist prepares the necessary conditions for filling the tooth by cleaning the cavities of bacteria and accumulated food. If the decay is close to the root, the dentist will place a liner made of glass ionomer, composite resin, or other materials to protect the root.

Usually, after placing the filler, the dentist polishes it. A few additional steps are required to fill with tooth-coloured materials, described below. After the dentist removes the decay and cleans the area, the tooth-coloured material is applied in layers. Then a special light is applied to it, which causes each layer to harden. When the multi-layer process is finished, the dentist cuts the composite material into the desired shape, shaves off the extra material and finally polishes it.

Most dentists recommend visiting the dentist twice a year. This care and prevention are for people without serious problems. Of course, others may need more references. It would help if you saw a dentist when you first noticed a fracture or a cavity in your tooth. If the problem is detected early, the tooth and its associated nerves can be saved. The longer you wait, the bigger the problem.